Menu

Free Delivery on Samples

Tile Backing Board

Sort By

9 Products
Sort
£7.99
A cement-based board which provides a perfect surface to tile onto.
£5.25
No more ply screws are used for fixing down 6mm no more ply,
£6.49
No more ply screws are used for fixing down 6mm no more ply,
£70.00
Tilebacker boards can be tiled onto directly and require no priming. The boards are light weight and easy to carry and install.
£60.00
Tilebacker boards can be tiled onto directly and require no priming. The boards are light weight and easy to carry and install.
£6.99
No more ply scoring knife is used for cutting No More Ply boards.
£9.95
A stronger partition walling material than plasterboard
£6.75
This tape is used for taping over joint in when using our insulated tile backer boards.
£9.00
These steel washers are used when screwing tile backer boards to walls.
Tile backer boards are the perfect board to fit tiles to, both cement boards and insulated boards are both stable and are moisture resistant so ideal for walls and floors in both wet and dry areas. Bellissimo tiles and tools recommends using tile backer board over plywood.

When fitting tile to a wood substrate it is essential that the sub floor is overboard to avoid cracked tiles, cracked grout or tiles lifting. This is due to the fact that wood can move due to moisture in the air and temperature. No More Ply tile backing board is the perfect solution to this problem; it is only 6mm thick with means that increasing the height of the floors is kept to a minimum as well.